參數 Parameter |
單位 Unit |
XK9350D |
行程 Travel |
加工軋輥最大直徑 Max. Diameter of processed roller |
mm |
500 |
加工軋輥最大長度 Max. length of processed roller |
mm |
2500 |
適用于螺紋鋼規格 Suitable threaded steel specification |
- |
φ5-50 |
主軸Spindle |
銑頭主軸轉速 Rotation of main milling head shaft |
rpm |
200-8000 |
頭架主軸錐孔 Conical hole of main head frame shaft |
- |
莫氏5# |
頭架用四爪卡盤 Four-claw chuck is used for main main head frame shaf |
|
Φ400 |
銑頭快速擺動速度 Quick swing speed of milling head |
°/min |
1000 |
飛刀主軸轉速 Rotation of main shaft of flying knife |
Rpm/kw |
15-600 |
其他 |
縱向移動最小單位 Main input(A-axis) |
mm |
0.01 |
編程最小設定 |
- |
0.001°,0.001mm |
控制系統 Control system |
- |
三菱系統 |
聯動軸 Linked axes (four) |
- |
X/Y/Z/A |
主電機電源 Main motor power |
- |
380V,50HZ |
控制系統工作電源 Control system working power |
- |
220V,50HZ |
銑頭電機功率 Milling head motor |
kw |
2.2 |
冷卻泵電機功率1 Cooling pump motor 1 |
w |
90 |
冷卻泵電機功率2 Cooling pump motor 2 |
w |
40 |
伺服電機額定扭矩(X) Servo motor max.torque(X) |
N.m |
10 |
伺服電機額定扭矩(Y) Servo motor max.torque(Y) |
N.m |
7.2 |
伺服電機額定扭矩(Z) Servo motor max.torque(Z) |
N.m |
4.8 |
伺服電機額定扭矩(A) Servo motor max.torque(A) |
N.m |
4.8 |
機床重量 Weight |
kg |
4085 |
尺寸(長x寬x高) Dimension |
mm |
3850x1350x1400 |